Z3 Zero, Dual Zero Difference

Z3 Zero, Dual Zero Difference

$89 ($71 + VAT)

The Z3 is a is a two channel zero difference trigger the can be CV controlled.

The Z3 was mainly designed for audiorate wave-splicing together with a Switch but it can also be used to detect zero crossings of signals, to detect zero difference between two signals, to perform click free switching, to add jitter to signals, to synchronize signals and many other things.
It is mainly designed to be used in combination with other modules such as the Switch module but can also be used on its own.

The Z3 is the same module as the Z2 but with a different front panel.

In stock

Description

The two sides of the Z3 is built around a comparator and a one bit memory that is clocked by the comparator. This is the evaluating click less switching control circuit used in the D-2, 4-Band Distortion module but with all the ins and outs accessible.

The module is DC coupled so it can be used with anything from DC and control signals to audio rate and above audio rate.

Device specs

Module size: 2 hp wide, 29 mm deep with power connector.

Input impedance: 100 kohm

Power requirements: +12V. Max power consumption 10 mA.

                               -12V. Max power consumption 3 mA.

Connect the power cable with the red stripe towards the marking -12V on the board.

The unit is protected for reverse power.

Manual (Z3)

Manual (Z3)

Download: Z3 Zero manual (pdf)

Videos (Z3)

Videos (Z3)